PRPMC load error

[Kumaresh]

Hi,

When I boot the box with PRPMC card, I got the following output.

Local Memory Found =20000000 (&536870912)


WARNING: Configuration Data Failure (Invoke 'ENV' Command)


WARNING: Board Configuration Data Failure


MPU Clock Speed =450Mhz


BUS Clock Speed =100Mhz


Reset Vector Location : ROM Bank A
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s) : NONE


L2Cache: 2048KB, 180Mhz
System Memory: 512MB, ECC Enabled (ECC-Memory Detected)


WARNING: NVRAM Header Test Failed, Auto Initializing

After this, the box hangs and I didn't get the prompt. Could you
provide me how to resolve this issue.

Thanks,
Kumaresh

[William Dennen]

What is the "box"?
What PrPMC?
Is the PrPMC the monarch?
Are these messages from the PrPMC console or from the "box"'s console?

Perchance do you have a ":" prompt?

Regards
--
Bill Dennen ][ We have met the enemy,

@< ][ and they are us ...
Hi,
When I boot the box with PRPMC card, I got the following output.
Local Memory Found =20000000 (&536870912)
WARNING: Configuration Data Failure (Invoke 'ENV' Command)
WARNING: Board Configuration Data Failure
MPU Clock Speed =450Mhz
BUS Clock Speed =100Mhz
Reset Vector Location : ROM Bank A
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s) : NONE
L2Cache: 2048KB, 180Mhz
System Memory: 512MB, ECC Enabled (ECC-Memory Detected)
WARNING: NVRAM Header Test Failed, Auto Initializing
After this, the box hangs and I didn't get the prompt. Could you
provide me how to resolve this issue.
Thanks,
Kumaresh