Discussion:
Debian on G3 upgraded PPC 8500
(too old to reply)
YF Yong
2006-07-04 07:50:16 UTC
Permalink
Hi,

I'm a newbie who's just managed to install Debian 3.1 on an Old-World
PCI PPC 8500. All I've managed so far is a command-line interface. For
some reason, Gnome Display Manager is unable to run - error message
indicating that the Xserver is unable to run, apparently not recognizing
the display device. I would appreciate any advice as to how I can, if at
all possible, boot into the GUI (X Windows?).

My system setup:

PCI PowerPC 8500 upgraded with 500Mhz G3 daughter card
128MB RAM
2 x 4 gig hard drives, with one dedicated for Debian.
Running OS 9.2 and using BootX Bootloader
15" Compaq CRT monitor (with adapter)
Kensingnton 4-button ADB Mouse


YF
Mikael Pettersson
2006-07-04 12:33:16 UTC
Permalink
Post by YF Yong
Hi,
I'm a newbie who's just managed to install Debian 3.1 on an Old-World
PCI PPC 8500. All I've managed so far is a command-line interface. For
some reason, Gnome Display Manager is unable to run - error message
indicating that the Xserver is unable to run, apparently not recognizing
the display device. I would appreciate any advice as to how I can, if at
all possible, boot into the GUI (X Windows?).
PCI PowerPC 8500 upgraded with 500Mhz G3 daughter card
128MB RAM
2 x 4 gig hard drives, with one dedicated for Debian.
Running OS 9.2 and using BootX Bootloader
15" Compaq CRT monitor (with adapter)
Kensingnton 4-button ADB Mouse
You need to tell us what kind of graphics card you have,
how X has been configured, and how X fails.

The output of /sbin/lspci and the contents of /etc/X11/xorg.conf
and /var/log/Xorg.0.log should suffice for that.
--
Mikael Pettersson (***@csd.uu.se)
Computing Science Department, Uppsala University
------------ And now a word from our sponsor ------------------
Want to have instant messaging, and chat rooms, and discussion
groups for your local users or business, you need dbabble!
-- See http://netwinsite.com/sponsor/sponsor_dbabble.htm ----
YF Yong
2006-07-04 16:29:06 UTC
Permalink
Post by Mikael Pettersson
Post by YF Yong
Hi,
I'm a newbie who's just managed to install Debian 3.1 on an Old-World
PCI PPC 8500. All I've managed so far is a command-line interface. For
some reason, Gnome Display Manager is unable to run - error message
indicating that the Xserver is unable to run, apparently not recognizing
the display device. I would appreciate any advice as to how I can, if at
all possible, boot into the GUI (X Windows?).
PCI PowerPC 8500 upgraded with 500Mhz G3 daughter card
128MB RAM
2 x 4 gig hard drives, with one dedicated for Debian.
Running OS 9.2 and using BootX Bootloader
15" Compaq CRT monitor (with adapter)
Kensingnton 4-button ADB Mouse
You need to tell us what kind of graphics card you have,
how X has been configured, and how X fails.
The output of /sbin/lspci and the contents of /etc/X11/xorg.conf
and /var/log/Xorg.0.log should suffice for that.
Thank you for your response.

Graphics or video output from my 8500 is through the motherboard's (I
presume Apple's) chipset. I don't seem to be able to locate the outputs
you indicated above, but there's a log file at /var/log/XFree86.0.log.

I'm so new to linux that I've not figured out how to transfer/extract
that file to attach to this email (separate PC). Would appreciate a tip
on how to do it. Pending that, the onscreen error messages from the
Xserver output are:

(==) Logfile: "/var/log/XFree86.0.log". Time:Wed Jul 5 11:26:05 2006
(==) Using config file: "/etc/X11/F86 Config-4"
Skipping
"/usr/X11R6/lib/modules/extensions/libGlcore.a:m_debug_clip.0": No
symbols found
Skipping
"/usr/X11R6/lib/modules/extensions/libGlcore.a:m_debug_norm.0": No
symbols found
Skipping
"/usr/X11R6/lib/modules/extensions/libGlcore.a:m_debug_xform.0": No
symbols found
Skipping
"/usr/X11R6/lib/modules/extensions/libGlcore.a:m_debug_vertex.0": No
symbols found
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.0": No
symbols found
(EE) No devices detected



YF

Loading...